Canon LV 7490 - Manual (Page 34)

34
Computer Input
Image select Menu
IMAGE button
Presentation
High contrast
User 1
User 2
User 3
Image Mode Selection
User 4
Blackboard(Green)
Standard
Remote controller
IMAGE button
Select the desired image mode among
Presentation, Standard, High contrast,
Cinema, Blackboard (Green), Colorboard,
User 1, User 2, User 3 and User 4 by pressing
the IMAGE button on the remote controller.
Standard
Picture mode with improved halftone for
graphics.
High contrast
Blackboard (Green)
User 1-4
For the image projected on a blackboard.
This mode helps enhance the image projected
on a blackboard. This is mainly effective on a
green colored board, not truly effective on a
black colored board.
Presentation
Direct Operation
For viewing pictures in a bright room.
Normal picture mode preset on the projector.
For viewing with the user preset image mode
in the Image Adjust Menu (see page 35).
1
2
Menu Operation
Colorboard
Colorboard
At the time of simple projection on the colored
wall, you can get the close color image to the
color image projected on a white screen by
selecting the similar color to the wall color from
the preset four colors.
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select Image select and then
press the Point ► button or the OK button.
Use the Point ▲▼ buttons to select the
desired item and then press the OK button.
Picture mode adjusted with fine tone.
Cinema
Cinema