Canon LV 7490 - Manual (Page 33)

Computer Input
33
Computer Input
Store
To store the adjusted data, select
Store and
then press the Point ► button or the OK button.
Move the highlight to one of the Modes 1 to 10
in which you want to store, and then press the
OK button.
Mode free
To clear the stored data, select
Mode free and
then press the Point ► button or the OK button.
Move the highlight to the Mode that you want to
clear and then press the OK button.
 Note:
• Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the
PC System Menu (p.30).
• When input computer signal to the projector, PC adjust will become available.
Reset
To reset the adjusted data, select
Reset and
press the OK button. A confirmation box appears
and then select Yes. All adjustments will return
to their previous figures.
This Mode has stored
parameters.
Values of Total dots, Horizontal
position, Vertical position, Display area
H, and Display area V.
Vacant
Press the OK button to
store the data.
Press MENU
button to close this
dialog box.
Mode free
Store