Canon LV 7490 - Manual (Page 44)

44
VIDEO Input
Aspect Setting
This projector has the picture screen resize function, which enables you to customize the image size.
Normal
Aspect Menu
1
2
Provide the image to fit the screen size while
maintaining the aspect ratio of the input signal.
Custom adj.
 Note:
• When no signal is detected, Normal is set
automatically and the Aspect adjustment menu
disappears.
• The adjustable range for Scale H/V and
Position H/V is limited depending on the input
signal.
Full
Provide the full screen image.
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼ buttons
to select Aspect and then press the Point ►
button or the OK button.
Use the Point ▲▼ buttons select the desired
item and then press the OK button.
Adjust the screen scale and position manually with
this function.
Press the Point ► button at Custom adj. and
the Custom adjustment menu is displayed on the
screen, you can use the Point ▲▼ buttons to
choose the item you want to adjust.
Scale H/V ...... Adjust the Horizontal/Vertical
screen scale.
H&V ............... When set to On, the aspect ratio
is fixed. The Scale V appears
dimmed and becomes unavailable.
Adjust Scale H, then the screen
scale is automatically modified
based on the aspect ratio.
Position H/V .. Adjust the Horizontal/Vertical
screen position.
Common ....... Save the adjusted scale or position
to all the inputs. Press the OK
button at Common to display a
confirmation box. To save the scale
or position, press the OK button at
Yes. When Custom is selected,
the saved scale or position is used.
Reset ............. Reset the all adjusted values.
Press the OK button at Reset to
display a confirmation box. To
reset, press the OK button at Yes.
Custom
Provide the last stored aspect screen image.
16:9
Provide the image at the 16:9 wide screen ratio.
Zoom
Pan the horizontal direction of the image and
cut the vertical direction of the image to fit the
screen size (16:9). Only for 4:3 video aspect
ratio signals.