Canon imagePROGRAF iPF825 - Manual (Page 126)

• Borderless Printing by Resizing Originals to Fit the Roll Width (Windows) →P.110
• Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X) →P.112
Borderless Printing by Resizing Originals to Fit the Roll Width (Windows)
This topic describes how to enlarge originals before borderless printing to match the roll width, based on the following ex-
ample.
• Document: Any type
• Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
• Paper: Roll
• Paper type: Heavyweight Coated Paper
• Roll paper width: 10 inches (254.0 mm)
1.
In the application, create an original that takes up the entire space of the paper size.
Note
• If you can specify the margin, as in Microsoft Word, set the margin at 0 mm. For instructions on
specifying the margin, refer to the software documentation.
2.
Choose Print in the application menu.
3.
Select the printer in the dialog box, and then display the printer driver dialog box.(See "Accessing the Printer Driv-
er Dialog Box from Applications (Windows)
→P.216 ")
4.
Make sure the Main sheet is displayed.
5.
In the A Media Type list, select the type of paper that is loaded. In this case, click Heavyweight Coated Paper.
Enhanced Printing Options > Borderless Printing >
Borderless Printing by Resizing Originals to Fit the Roll Width (Windows) iPF825
3
110