Canon imagePROGRAF iPF825 - Manual (Page 928)

Messages regarding HP-GL/2
This type of paper is not compatible with HP-GL/2. ........................................................................................ 912
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) ...................................................................... 912
GL2: W0502 The parameter is out of range. ................................................................................................... 912
GL2: W0504 This command is not supported. ................................................................................................ 912
This type of paper is not compatible with HP-GL/2.
Cause Corrective Action
The printer has received a HP-GL/2
print job that cannot be printed on the
paper that has been advanced. Follow these steps to replace the type of paper in the printer.
1. Hold down the Stop button for a second or more to cancel printing.
2. Replace the paper with a type compatible with HP-GL/2. For details on
paper compatible with HP-GL/2, refer to the Paper Reference Guide.
(See "Types of Paper.")
→P.623
Press the Online button to resume printing. However, note that this error
may cause paper jams and affect the printing quality.
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)
Cause Corrective Action
The printer memory became full while processing the job received. Check the print job and the printing results.
GL2: W0502 The parameter is out of range.
Cause Corrective Action
A parameter specified in a HP-GL/2 command is out of the supported range. Check the print job.
GL2: W0504 This command is not supported.
Cause Corrective Action
The printer has received an unsupported HP-GL/2 command. Check the print job.
Error Message > Messages regarding HP-GL/2 >
This type of paper is not compatible with HP-GL/2. iPF825
13
912