Canon imagePROGRAF iPF825 - Manual (Page 218)

9.
Click
C
Set to display the Paper Detailed Settings dialog box.
10.
To enable automatic cutting, click Printer Default in the
H
Automatic Cutting list. If you prefer to cut the paper
later yourself, click Print Cut Guideline.
Important
• If the automatic cut function has been deactivated on the printer, change the auto cut setting on the
printer Control Panel.
11.
Click OK to close the Paper Detailed Settings dialog box.
12.
Confirm the print settings, and then click M Print to start printing.
Note
• For tips on confirming print settings, see "Confirming Print Settings (Mac OS X) →P.435 "
Switching the Paper Source of Roll Paper to Match the Paper Size
You can configure the settings to print by automatically switching between roll 1 and roll 2 depending on the paper size
being printed. Because the roll paper that produces the smallest margin upon printing is automatically selected, you can
economize on paper.
Important
• This function is only supported in Windows.
1.
Click start > Printers and Faxes (or Printers ).
Enhanced Printing Options > Other useful settings >
Switching the Paper Source of Roll Paper to Match the Paper Size iPF825
3
202