Canon imagePROGRAF iPF825 - Manual (Page 250)

D
Fit Paper Size
Scales the document image to match the paper size.
E Scale to fit Roll Paper Width
Scales the document image to match the roll width.
F Print Image with Actual Size
Prints documents at their actual size. This function is available when you have selected the size same as the width of Roll
Paper for either the length or width of the document from the
A Page Size list.
G Paper Size
Available when D Fit Paper Size is selected.
Choose the size of the paper you will print on.
For details on available paper sizes, see "Paper Sizes
→P.626 "
Paper sizes compatible with borderless printing are shown in the list.
C Enlarged/Reduced Printing
Choose from the following options when this setting is activated.
• Resizing Originals to Match the Paper Size →P.66
• Resizing Originals to Fit the Roll Width →P.72
• Resizing Originals by Entering a Scaling Value →P.78
D Fit Paper Size
Scales the document image to match the paper size.
E Fit Roll Paper Width
Scales the document image to match the roll width.
F Scaling
Resizes the document image based on a specified scaling value. Enter a value in a range of 5–600.
G
Paper Size
Choose the size of the paper you will print on.
For details on available paper sizes, see "Paper Sizes
→P.626 "
H Orientation
Choose the printing orientation.
Windows Software > Printer Driver >
Page Setup Sheet iPF825
4
234