Canon imagePROGRAF iPF825 User Manual

Page 693

Advertising

Note

• If advanced adjustment does not improve printing results, or if you are using special paper, try manual ad-

justment.
For instructions on manual adjustment, see "Manual Straightening of Lines and Colors (Manual Head
Adj)."

→P.678

• Use Standard Adj. if you have switched to another type of paper or if you want the boundaries between

colors to appear as attractive as possible.

• Use Advanced Adj. to fine-tune the space between nozzles or colors if you have switched the printhead or if

you want printed documents to appear as vivid as possible. We recommend using Advanced Adj. for print-
ing at a higher level of image quality.

• Always make sure the loaded paper matches the type of paper specified on the printer. Adjustment cannot be

completed correctly unless the loaded paper matches the settings.

• We recommend using the type of paper you use most often for adjustment.
• This function is not available with CAD Tracing Paper, CAD Translucent Matte Film, or CAD Clear Film. If

adjustment is not possible as expected using highly transparent film or similar media, try another type of pa-
per, or try adjust the Printhead alignment manually. (See "Manual Straightening of Lines and Colors
(Manual Head Adj).")

→P.678

Paper to Prepare

Rolls

An unused roll at least 10 inches wide

Sheets

Standard Adj. : One sheet of unused paper of at least A4/Letter size
Advanced Adj. : Five sheets of unused paper of at least A4/Letter size (or one sheet when using A2 or larger,
or two sheets when using A3 loaded lengthwise)

Execute Auto Head Adj. as follows.

Load paper.

• Attaching the Roll Holder to Rolls

→P.629

• Loading Rolls in the Printer

→P.634

• Loading Sheets in the Printer

→P.664

Press the Menu button to display MAIN MENU.

Press ▲ or ▼ to select Adjust Printer, and then press the ▶ button.

Press ▲ or ▼ to select Auto Head Adj., and then press the ▶ button.

Press ▲ or ▼ to select Standard Adj. or Advanced Adj., and then press the ▶ button.