Cop y – Canon PowerShot SX50 HS User Manual
Page 139
139
Shooting Range and Focusing
Still Images
Choosing a Person to Focus On (Face Select)
You can shoot after choosing a specific person’s face to focus on.
1
Set the AF frame to [Face
Detect] (= 133).
2
Enter Face Select mode.
z
z
Aim the camera at the person’s face and
press the < > button.
X
X
After [Face Select : On] is displayed, a
face frame [ ] is displayed around the
face detected as the main subject.
z
z
Even if the subject moves, the face frame
[ ] follows the subject within a certain
range.
z
z
If a face is not detected, [ ] is not
displayed.
3
Choose the face to focus on.
z
z
To switch the face frame [ ] to another
detected face, press the < > button.
z
z
After you have switched the face frame
to all detected faces, [Face Select : Off]
is displayed, and the specified AF frame
mode screen is displayed again.
4
Shoot.
z
z
Press the shutter button halfway. After the
camera focuses, [ ] changes to [ ].
z
z
Press the shutter button all the way down
to shoot.
COP
Y