Canon PowerShot SX50 HS - Manual (Page 145)

145
Flash
2
Lock the flash exposure.
z z Aim the camera at the subject to shoot
with the exposure locked. With the
shutter button pressed halfway, press the
< o> button.
X X The flash fires, and when [ ] is
displayed, the flash output level is
retained.
z z To unlock FE, release the shutter button
and press the < o> button again. In this
case, [ ] is no longer displayed.
3
Compose the shot and shoot.
z z After one shot, FE is unlocked and [ ] is
no longer displayed.
• FE: Flash Exposure
Still Images
Changing the Flash Timing
Change the timing of the flash and shutter release as follows.
1
Access the setting screen.
z z Press the < n> button, choose [Flash
Control] on the [ 4] tab, and then press
the < m> button (= 42).
2
Configure the setting.
z z Choose [Shutter Sync.], and then choose
the desired option ( = 42).
1st-curtain The flash fires immediately after
the shutter opens.
2nd-curtain The flash fires immediately before
the shutter closes.
COP
Y