Canon PowerShot SX50 HS - Manual (Page 20)

20
Initial Preparations
• Unless you set the date, time, and home time zone, the [Date/
Time] screen will be displayed each time you turn the camera on.
Specify the correct information.
• To set daylight saving time (1 hour ahead), choose [ ] in step 2 and then
choose [ ] by pressing the < o><p> buttons or turning the <5> dial.
Changing the Date and Time
Adjust the date and time as follows.
1
Access the camera menu.
z z Press the < n> button.
2
Choose [Date/Time].
z z Move the zoom lever to choose the [ 3]
tab.
z z Press the < o><p> buttons or turn the
< 5> dial to choose [Date/Time], and
then press the < m> button.
3
Change the date and time.
z z Follow step 2 on = 19 to adjust the
settings.
z z Press the < n> button to close the
menu.
• Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
• The date/time battery will be charged in about 4 hours once you insert a
charged battery or connect the camera to an AC adapter kit (sold separately,
= 215), even if the camera is left off.
• Once the date/time battery is depleted, the [Date/Time] screen will be
displayed when you turn the camera on. Follow the steps on = 19 to set
the date and time.
COP
Y