Canon PowerShot SX50 HS - Manual (Page 193)

193
Editing Still Images
Still Images
Correcting Red-Eye
Automatically corrects images affected by red-eye. You can save the
corrected image as a separate file.
1
Choose [Red-Eye Correction].
z z Press the < n> button, and then
choose [Red-Eye Correction] on the [ 1]
tab ( = 42).
2
Choose an image.
z z Press the < q><r> buttons or turn the
< 5> dial to choose an image.
3
Correct the image.
z z Press the < m> button.
X X Red-eye detected by the camera is now
corrected, and frames are displayed
around corrected image areas.
z z Enlarge or reduce images as needed.
Follow the steps in = 172.
4
Save as a new image and review.
z z Press the < o><p><q><r> buttons or
turn the < 5> dial to choose [New File],
and then press the < m> button.
X X The image is now saved as a new file.
z z Follow step 5 on = 189.
• Some images may not be corrected accurately.
• To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be erased.
• Protected images cannot be overwritten.
• RAW images cannot be edited this way.
• Red-eye correction can be applied to JPEG images shot in [ ],
but the original image cannot be overwritten.
COP
Y