Canon PowerShot SX50 HS - Manual (Page 238)

238
Printing Images
Still Images
Adding Images to the Print List (DPOF)
Batch printing ( = 242) and ordering prints from a photo development
service can be set up on the camera. Choose up to 998 images on a
memory card and configure relevant settings, such as the number of copies,
as follows. The printing information you prepare this way will conform to
DPOF (Digital Print Order Format) standards.
• RAW images cannot be included in print list.
Still Images
Adding Images to the Print List via the <c> Button
You can add images to the print list (DPOF) after your shot or later during
playback simply by pressing the < c> button.
1
Choose an image.
z z Press the < q><r> buttons or turn the
< 5> dial to choose an image.
2
Add the image to the print list.
z z Press the < c> button.
z z Press the < o><p> buttons to specify
the number of prints. Choose [Add] by
pressing the < q><r> buttons or turning
the < 5> dial, and then press the <m>
button.
z z To remove the image from the print list,
repeat steps 1 – 2 but choose [Remove]
by pressing the < q><r> buttons or
turning the < 5> dial, and then press the
< m> button.
• Print list cannot be set up while the camera is connected to a printer.
COP
Y