Cop y – Canon PowerShot SX50 HS User Manual
Page 230
230
Using Optional Accessories
*1 E-TTL mode is used for the flash.
*2 M mode is used for the flash. In [
D] shooting mode, E-TTL mode is also available for
the flash. In this case, when the flash fires, flash exposure compensation set on the
flash is applied to the flash output level set on the camera.
*3 Can be configured only when [Flash Mode] is [Auto] and flash exposure
compensation set on the flash is [+0]. When you adjust flash exposure compensation
on 600EX-RT, 600EX, 580EX II, or 430EX II Speedlites, the camera display will be
updated accordingly.
*4 Can be configured when [Flash Mode] is [Manual]. Linked to settings on the flash
unit.
*5 1/64 for Speedlite 430EX II/430EX/320EX/270EX II/270EX.
*6 For options other than On/Off, configure the setting on the flash unit itself. Not
available with Speedlite 430EX II/320EX/270EX II/270EX. When this setting is set to
[On], [Shutter Sync.] cannot be set to [2nd-curtain]. (If [Shutter Sync.] is set to [2nd-
curtain], it will be changed to [1st-curtain].)
*7 Can only be configured when [Flash Mode] is [Auto].
*8 Restores all default settings. You can also restore defaults for [Slow Synchro], [Safety
FE], [Red-Eye Corr.], and [Red-Eye Lamp] by using [Reset All] in the [
3] menu on
the camera (
•
Flash settings in [
] shooting mode can be configured just as they are in
<
G> mode.
•
In <
A> shooting mode, icons representing Smiling, Sleeping, Babies
(Smiling), Babies (Sleeping), and Children shooting scenes determined by
the camera are not displayed, and the camera does not shoot continuously
(
COP
Y