Canon VIXIA HF R52 - Manual (Page 134)

134 Š
Wi-Fi Functions
2 Touch the desired setup method.
Depending on the setup method chosen, the procedure will be
different. Read the descriptions below and continue with the procedure
described in the relevant page.
Options
* WPS, which stands for Wi-Fi Protected Setup, is a standard that makes connect-
ing to a wireless router easier.
[WPS: Button]* Simply press and hold the WPS button on your
wireless router and then touch the camcorder’s screen. This is
the easiest connection method if you are using a WPS-compati-
ble router. Continue the procedure as described in
Wi-Fi Pro-
tected Setup (WPS) (A 135).
[WPS: PIN Code]* Access the access point’s configuration screen
using your Web browser. The camcorder will give you a PIN
code, which you will enter into the browser. You will need a WPS-
compatible router and a computer or other device connected to
it. Continue the procedure as described in
Wi-Fi Protected Setup
(WPS) (A 135).
[Search for Access Points] Following the camcorder’s onscreen
instructions, you select the desired access point from a list and
then enter your password. Continue the procedure as described
in
Searching for Access Points (A 136).
[Manual Setup] You manually enter the access point’s name, pass-
word and other network settings. This method is recommended
only for advanced users of Wi-Fi networks. Continue the proce-
dure as described in
Manual Setup (A 136).
0
> [ Remote Control+Streaming] (recording mode) or
[— Wi-Fi] (video playback mode, from any index screen)
> [w Check/Edit Settings] > [OK] >
[Access Point Connection Settings] > [Not configured]
COP
Y