Canon VIXIA HF R52 - Manual (Page 137)

Wi-Fi Functions
Š 137
2 In the [Authentication/Encryption Method] field, touch [OPEN
NONE] and then touch the desired method.
If you selected [OPEN WEP], the WEP index is 1.
3 In the [Encryption Key] field, enter the encryption key (password).
Touch [OK] and then touch [Next].
If you selected [OPEN NONE] in step 2, this step is not necessary.
4 Touch [Automatic] or [Manual] to select how to obtain the IP
address.
If you selected [Automatic], proceed to step 9.
5 To enter the [IP Address] field, touch [0.0.0.0]. Touch the first field
and touch [Н]/[О] to change the value. Change the rest of the
fields in the same way and touch [OK].
6 Enter the [Subnet Mask] field in the same way and touch [Next].
7 Enter the [Default Gateway] field in the same way and touch
[Next].
8 Enter the [Primary DNS Server] and [Secondary DNS Server] fields
in the same way and touch [Next].
9 Touch [OK] to save the configuration.
• If you were in the process of performing another procedure, the
camcorder will automatically connect to the access point. Return to
the procedure of the function you were previously using:
Step 6 in
Streaming via Wi-Fi and Internet (Monitor while Out)
(A 122); Step 2 in Sharing Your Recordings Using Web Services
(A 130); Step 2 in Wireless Playback on a Computer (A 132).
• Otherwise, touch [K] > [X] to close the menu.
NOTES
• The Wi-Fi functions available and the setup method will vary depending
on the specifications and characteristics of the Wi-Fi network you want
to use.
COP
Y