Canon VIXIA HF R52 - Manual (Page 166)

166 Š
Additional Information
Cannot communicate with the battery pack. Continue using this battery pack?
- You attached a battery pack that is not recommended by Canon for use with this camcorder.
- If you are using a battery pack recommended by Canon for use with this camcorder, there
may be a problem with the camcorder or battery pack. Consult a Canon Service Center.
Cannot convert scenes recorded at 60P
- Scenes that were recorded at 60P cannot be converted to MP4.
Cannot convert the scene
- You cannot convert scenes recorded using another device.
B Cannot copy
- The total size of the scenes you selected to copy exceeds the available space on the memory
card. Delete some recordings on the memory card ( A 53) or reduce the number of scenes to
copy.
- The memory card already contains the maximum number of AVCHD scenes (3,999 scenes).
Delete some scenes ( A 53) to free some space.
Cannot divide the scene
- The scene could not be divided because the camcorder’s internal scene management data log
is full. Delete some scenes and photos ( A 53) and try dividing the scene again.
Cannot join 24P and 30P scenes to convert them
- Scenes recorded with a frame rate of 24P cannot be joined with those recorded with a frame
rate of 30P.
Cannot load canvas
- The canvas file that was saved on the memory is corrupted.
- Canvas data cannot be read from canvas files created using other devices.
Cannot play back
- You may not be able to play back scenes recorded or edited using another device.
- There is a problem with the memory. If this message appears often without apparent reason,
contact a Canon Service Center.
B Cannot play back Cannot access the built-in memory
- There is a problem with the built-in memory. Save your recordings ( A 105) and initialize the
built-in memory using the [Complete Initialization] option ( A 29). If the problem persists,
contact a Canon Service Center.
Cannot play back Check the memory card
- There is a problem with the memory card. Save your recordings ( A 105) and initialize the
memory card using the [Complete Initialization] option ( A 29). If the problem persists, use a
different memory card.
B Cannot play the movies in the built-in memory Initialize only using the camcorder
- The camcorder’s built-in memory was initialized using a computer. Initialize the built-in mem-
ory with this camcorder ( A 29).
COP
Y