Canon VIXIA HF R52 - Manual (Page 39)

Basic Shooting and Playback
Š 39
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.
• Be sure to save your recordings regularly (A 103), especially after
making important recordings. Canon shall not be liable for any loss or
corruption of data.
NOTES
• About the power saving mode: If 1 > q > [Auto Power Off] is set
to [i On], the camcorder will shut off automatically to save power
when it is powered by a battery pack and is left without any operation
for 3 minutes. Should this happen, turn the camcorder back on.
• When recording in bright places, it may be difficult to use the LCD
screen. In such cases, you can adjust the LCD backlight with the 1 >
t > [LCD Backlight] setting or adjust the brightness of the LCD
screen with the 1 > t > [LCD Brightness] setting.
• If you plan on making a long recording while the camcorder is in a fixed
position, such as on a tripod, you can record with the LCD panel closed
in order to conserve the battery’s power. In such case, make sure
1
> q > [Power On Using LCD Panel] is set to [Off].
COP
Y