ATEN ACS-1208AL - Manual (Page 30)

Invoking Auto Scan:
To start Auto Scanning, key in the following Hotkey combination:
1. Invoke Hotkey Mode (see p. 3-1).
2. Press [A].
When you press A, you automatically exit Hotkey Mode; enter
Auto Scan Mode; and Auto Scanning begins.
M While you are in Auto Scan Mode, you can pause the scanning
in order to keep the focus on a particular computer either by
pressing P or with a Left Click of the mouse. During the time
that Auto Scanning is paused, the Command Line displays:
Auto Scan: Paused.
Pausing when you want to keep the focus on a particular computer
is more convenient than Exiting Auto Scan Mode because when
you Resume scanning, you start from where you left off.
If, on the other hand, you were to Exit Auto Scan Mode, scanning
would start over from the very first computer on the installation
when you restarted.
To resume Auto Scanning after Pausing, press any key or Left
Click. Scanning continues from where it left off.
M While Auto Scan Mode is in effect, ordinary keyboard and mouse
functions are suspended - only Auto Scan Mode compliant
keystrokes and mouse clicks can be input. You must exit Auto
Scan Mode in order to regain normal control of the console.
3. To exit Auto Scan Mode press [Esc] or [Spacebar]. Auto
Scanning stops when you exit Auto Scan Mode.
2003-01-27
ACS-1208AL / ACS-1216AL User Manual
3-4