ATEN ACS-1208AL - Manual (Page 36)

OSD
Functions
OSD functions are used to configure and control the OSD. For example,
you can: rapidly switch to any port; scan selected ports only; limit the
list you wish to view; designate a port as a Quick View Port; create or
edit a port name; or make OSD setting adjustments.
To access an OSD function:
1. Either Click a Function Key field at the top of the Main Screen, or
press a Function Key on the keyboard.
2. In the Submenus that appear make your choice either by Double
Clicking it, or moving the Highlight Bar to it, then pressing
[Enter].
3. Press [Esc] to return to the previous menu level.
F1 GOTO:
Clicking the F1 field or pressing [F1] activates the GOTO
function. GOTO allows you to switch directly to a port either by
keying in the port’s Name, or its Port ID.
w To use the Name method, key in 1; key in the port’s Name;
then press [Enter].
w To use the Port ID method, key in 2; key in the Port ID; then
press [Enter].
Note: You can key in a partial Name or Port ID. In that case, the
screen will show all the computers that the User has View
rights to (see SET ACCESSIBLE PORTS, p. 4-10), that
match the Name or Port ID pattern, regardless of the
current List settings (see F2 LIST, p. 4-5, for details).
To return to the OSD Main Screen without making a choice, press
[Esc].
2003-01-27
ACS-1208AL / ACS-1216AL User Manual
4-4