ATEN ACS-1208AL - Manual (Page 50)

Before You
Begin
To prepare for the firmware upgrade, do the following:
1. From a computer that is not part of your KVM installation go to
our Internet support site and choose the model name that relates to
your device to get a list of available Firmware Upgrade Packages.
2. Choose the Firmware Upgrade Package you want to install
(usually the most recent), and download it to your computer.
3. Use the Firmware Upgrade Cable (provided with this unit), to
connect a COM port on your computer to the Firmware Upgrade
Port of your device.
Note: On a daisy chained installation, connect the cable to the
First Station (Master) unit. The chained stations (Slaves)
will receive the upgrade via the daisy chain cables.
4. Shut down all of the computers - but not the Stations - on your
KVM installation.
5. From your KVM switch console, bring up the OSD (see p. 4-1)
and select the F4ADM function.
6. Scroll down to FIRMWARE UPGRADE. Press [Enter], then press [Y]
to invoke Firmware Upgrade Mode (see p. 4-11.) For your reference,
the current firmware upgrade version displays on the screen.
2003-01-27
ACS-1208AL / ACS-1216AL User Manual
5-2