ATEN ACS-1208AL - Manual (Page 54)

Upgrade
Succeeded
After the upgrade has completed, a screen appears to inform you that
the procedure was successful:
Click Finish to close the Firmware Upgrade Utility.
Upgrade
Failed
If the upgrade failed to complete successfully a dialog box appears
asking if you want to retry. Click Yes to retry. If you Click No, the
Upgrade Failed screen appears:
Click Cancel to close the Firmware Upgrade Utility. See the next
section, Firmware Upgrade Recovery, for how to proceed.
2003-01-27
ACS-1208AL / ACS-1216AL User Manual
5-6