2 protocol settings, Protocol settings – ArtDio IPF-2000 User Manual

Page 17

Advertising
background image

IPF-2000 User Manual

17

Ppp pin

With PPPoE selected the IP Type drop down list, please enter the password
in this field.

local ip

With Static selected the IP Type drop down list, please enter the IP address
of the IPF-2000 in this field.

subnet mask

With Static selected the IP Type drop down list, please enter the Subnet
Mask address of the IPF-2000 in this field.

router ip

With Static selected the IP Type drop down list, please enter the router IP
address of the IPF-2000 in this field.

Dns

With Static selected the IP Type drop down list, please enter the IP address
of the DNS server in this field.

Dns2

With Static selected the IP Type drop down list, please enter the IP address
of the backup DNS server in this field.

6.2 Protocol

Settings

Protocol Settings

Field Description

Use Service

Check this box if you will register to the server. Services response to
different protocols as follows:

• For the SIP protocol:

Check this box if you will register to the server. Then, enter the SIP
proxy server IP address or domain name in the service addr field.

• For the H.323 protocol: Enter the Gatekeeper IP address.

ƒ

To allow the IPF-2000 calls each other by E.164 number: Check
this option and then fill the IP address or domain name of
corresponding gatekeeper into the Service Addr. field.

ƒ

To make point to point calls to another voice gateway:
Do not check this option and enter the voice gateway’s IP
address in the Service Addr. field.

ƒ

To make calls by dialing IP address of other IP Phone or H.323
devices (such as Netmeeting) at the same network segment:
Do not check this option and leave Service Addr. field blank.

If the gatekeeper is not to be used, please configure the
Service Port as 1720. Detailed information please refers to the
Service Port configuration.

Advertising