ArtDio IPF-2000 - Manual (Page 27)

IPF-2000 User Manual
27
• Use
speaker:
When the phone rings, press ENTER button to pick up the call. Press Enter again to
hand up the call.
If you hear a busy tone after you dial, the other end is using the phone. Please hang up and
make the call later. You can reach this number by pressing the REDIAL button on the phone.
9.3 Check the IPF-2000 Call Records
9.3.1 Check Missed Calls
Press the MISS button to review any missed call. You can return a missed call by simply press
#. Press VOL+ to view the next entry and press VOL- to view the previous entry.
9.3.2 Check Received Calls
Press the ANS button to review any answered call. You can return an answered call by simply
press #. Press VOL+ to view the next entry and press VOL- to view the previous entry.
9.3.1 Check Dialed Calls
Press the CALLED button to review any dialed call. You can return a dialed call by simply
press #.
※ IPF-2000 is able to store a total of 80 Missed, Received, and Dialed call entries. When
entries exceed its capacity, IPF-2000 will delete the oldest entry automatically. Records will be
lost during power outage and reboot.
9.4 Speed Dial
Speed Dial feature can only used when entries are stored in the speed dial setting or in the
phone book on web configuration.
The operating instructions are as follows:
1. If you want to dial the 10
th
speed dial number
Æ press 10 on the IPF-2000 Æ press
SPD/HOLD.
2. Press the PHONE button on the phone twice Æ LCD shows the phone number on the
phone book
Æ Press VOL+ to view the next entry or press VOL- to view the previous
entry Æ press # to dial this phone number.
9.5 Mute
Press REDIAL/MUTE button during a conversation to initiate this feature. LCD will show
【Mute On】.
9.6 Hold
Press SPD/HOLD button during a conversation to hold a call. LCD on both side will show
【Call Hold】.