Aastra Telecom SIP 57I - Manual (Page 67)

Administrator Level Options
41-001160-00, Release 2.1, Rev 04 3-9
Administrator Options
Administrator Options References
For information about options available to a User AND Administrator in the
Aastra Web UI, see your Model-specific User Guide.
For procedures to Restart your phone or restore factory defaults, see “Restarting
Your Phone” on page 3-13 , and “Set Phone to Factory Defaults/Erase Local
Configuration” on page 3-15 .
For more information about Advanced Settings for the IP Phone, see Chapter 4,
“Configuring Network and Session Initiation Protocol (SIP) Features.”
For procedures on configuring the Basic Settings for the IP Phone, see Chapter 5,
“Configuring Operational Features.”
Configuration File Options
An Administrator can enter specific parameters in the configuration files to
configure the IP phones. All parameters in configuration files can only be set by
an administrator.
References
For a procedure on using the configuration files, see Chapter 2 , the section,
“Configuration Files (Administrator Only)” on page 2-1 .
For a description of each parameter you can enter in the configuration files, see
Appendix A, “Configuration Parameters.”