Aastra Telecom SIP 57I - Manual (Page 93)

Administrator Level Options
41-001160-00, Release 2.1, Rev 04 3-35
Administrator Options
Administrator Options Advanced Network Settings
Parameter In
IP Phone UI
Parameter in
Aastra Web UI
Parameters in
Configuration Files Description
UPnP UPnP upnp manager Enables or disables Universal Plug
and Play (UpnP) on the IP phone. If
you set this parameter to “0”, you
can manually configure NAT on the
IP phone and the UPnP manager
will not start.
For more information, see Chapter
4,
“Universal Plug and Play (UPnP)
(for remote phones)” on page 4-27 .
N/A N/A upnp gateway IP address or fully qualified Domain
Name of the Internet gateway or
router. This parameter stores the IP
address of the gateway or router in
the event that only non-default
UPnP gateways get discovered on
the network. The UPnP port
mappings are saved to this IP
address so even if the phone
reboots, it will still have the correct
port mappings.
For more information, see Chapter
4,
“Universal Plug and Play (UPnP)
(for remote phones)” on page 4-27 .
NAT IP NAT IP sip nat ip IP address the network device that
enforces NAT.
For more information, see Chapter
4,
“Configuring NAT Address and
Port (optional)” on page 4-21 .
NAT SIP Port NAT SIP Port sip nat port Port number of the network device
that enforces NAT.
For more information, see Chapter
4,
“Configuring NAT Address and
Port (optional)” on page 4-21 .