Aastra Telecom 9112i IP PHONE - Manual (Page 18)

12 9112i IP Phone User Guide
Progra
mmabl
e Keys
Setting "Park/Pickup" Keys
The 9112i phone has a park and
pickup call feature that allows you
to park a call and pickup a call
when required.
The IP phones support the Park/
Pickup feature on the Asterisk,
BroadWorks, Sylantro, and ININ
PBX servers.
You can set the programmable
keys on the 9112i to use the park/
pickup feature by setting a
programmable key as "Park" or
"Pickup" and then:
• specify a value
Note: The values you enter for each
softkey are dependent on the
type of server you are using
(Asterisk, BroadWorks, Sylantro,
or ININ PBX).
The park/pickup feature performs
as follows:
• When a call comes in, and you
pickup the handset, you can
press the applicable "Park" pro-
grammable key to park the call.
• After the call is parked, you can
press the "Pickup" programma-
ble key, followed by the applica-
ble value to pickup the call.
You configure a Park and Pickup
programmable configuration using
the Aastra Web UI.
The following table provides the
values you enter for the "Park
Call" and "Pickup Parked Call"
fields in the Aastra Web UI.
P Park/Pickup Call Server Configuration Values
*Leave "value" fields blank to disable the park and pickup feature.
Configuring Park/Pickup
Use the following procedure to
configure park/pickup on the 9112i
phone.
1. Click on Operation->
Programmable Keys and XML.
.
2. Pick a programmable key to
configure for Parking a call.
3. In the "Type" field, select Park.
4. In the "Value" field, enter the
approriate value based on the
server in your network.
Note: For values to enter in this field,
see the table "PPark/Pickup Call
Server Configuration Values" on
page 12 .
5. Click to save your
changes.
6. Click on Operation->Reset.
7. In the "Restart Phone" field
click to restart the IP
phone.
Server Park Values* Pickup Values*
Aasterisk 700 700
Sylantro *98 *99
BroadWorks *68 *88
ININ PBX callpark pickup
Aastra Web UI