About this guide, Documentation, Introduction – Aastra Telecom 9112i IP PHONE User Manual

Page 7: Phone features, Requirements, Phone features requirements, About thi s guide

Advertising
background image

9112i IP Phone User Guide

1

About Thi

s Guide

About This Guide

This guide explains how to use
your new 9112i phone. Not all
features listed are available by
default. Contact your system
administrator to find out which
features and services are available
on your system. Your system
administrator also has the ability to
customize some features on this
phone.

Documentation

• Aastra 9112i IP Installation

Guide – installation and set-up
instructions, general features
and functions, and basic options
list customization. This guide is
included in the box with your
phone.

Aastra SIP 9112i IP Phone User

Guide – explains the most
commonly used features and
functions. This guide can be
downloaded from
www.aastra.com

Aastra SIP 480i/480i CT/9112i/

9133i IP Phone Administration
Guide
– explains how to set the
9112i phone up on the network
and contains advanced configu-
ration instructions for the 9112i.
The Administrator Guide has
instructions that are at an
adminstrator level.

Introduction

The 9112i IP telephone has all the

features of a regular business

phone, allowing you to make and

receive calls, transfer, conference

and more. The 9112i IP telephone

provides communication over an

IP Network using the SIP IP

telephony protocol.

Phone Features

• Three-line backlit display screen
• 2 Programmable buttons, which

can be programmed as speed

dials

• Full-duplex speakerphone for

handsfree calls

• Built-in single port, 10/100

Ethernet jack

• Power adapter

Requirements

• A SIP-based IP PBX system or

network installed and running

with a number created for the

new 9112i IP phone.

• Adherence to SIP standard

RFC 3261.

• Access to a configuration server

where you can store the firm-

ware image and configuration

files.

The configuration server must

be able to accept connections

anonymously.

• The IP phone must be config-

ured for a specific type of proto-

col to use. (TFTP is enabled by

default). You can configure the

following protocols on the IP

phone:
- TFTP (Trivial File Transfer

Protocol)

- FTP (File Transfer Protocol)
- HTTP (Hypertext Transfer

Protocol)

• A 802.3 Ethernet/Fast Ethernet

LAN

• Category 5/5e straight through

cabling

• Power adapter

Advertising