LG LRG3095SW - Manual (Page 30)

30
OPERATING INSTRUCTIONS
HOW TO SET CONVECTION AUTO
CONVERSION FEATURE
When using convection bake and roast, the
Convection Auto Conversion feature will automatically
convert entered regular baking temperatures to
convection baking temperatures.
This feature is activated so that the display will show
the actual converted (reduced) temperature. For
example, if you enter a regular recipe temperature of
350°F(175°C) and touch the “START” pad, the
display will show the converted temperature of
325°F(165°C).
Touch and hold the “WARM” pad for 3
seconds.
Touch the number 1 pad to ENABLE
or 2 pad to DISABLE.
Touch the “START” pad to accept the
desired change.
SPECIAL FEATURES OF YOUR OVEN CONTROL
Your new touch pad control has additional features
that you may choose to use. The following pages
describe these features and how you may activate
them.
The special feature modes can only be activated
while the display is showing the time of day.
They remain in the control’s memory until the steps
are repeated.
When the display shows your choice, touch the
“START” pad. The special features will remain in
memory after a power failure.
or
NOTE
When cooking using a convection cycle, the oven
temperature is automatically reduced by 25 F. The
display will show the changed temperature. This
feature is called “AUTO CONVERSION” . Your range
comes with this feature “ENABLED”. To disable the
auto conversion feature, see “How To Set Convec-
tion Auto Convertion Function” in the Operation
Instruction section.