Using the agilent 66001a mps keyboard, Introduction, Connecting the keyboard – Agilent Technologies 66001A User Manual
Page 41: B. using the agilent 66001a mps keyboard, Introduction connecting the keyboard
Agilent 66001A MPS Keyboard 41
B
Using The Agilent 66001A MPS Keyboard
Introduction
This appendix describes the Agilent 66001A Modular Power System (MPS) Keyboard, which is available as an option for
the Agilent 66000A Modular Power System.
The Agilent 66001A MPS Keyboard lets you program the Agilent 66000A Modular Power System without having to
connect it to a computer. With the keyboard, you can:
■
Access any module in the mainframe that the keyboard is plugged into.
■
Display operating and status information from the selected module.
■
Control the module from the fields that appear on the display.
■
Program the module using SCPI commands and queries.
■
Read error messages.
Connecting The Keyboard
The keyboard plugs into a jack on the front of the mainframe as indicated in the following figure. A keyboard jack is also
available on the rear panel. The keyboard can be plugged in or out while the mainframe is on.
Note
Do not connect more than one keyboard to a mainframe.