HP ProLiant BL465c Gen8 Server Blade - Manual (Page 16)

Operations 16
2. Connect the drive cable connectors to the SAS controller.
3. Install the access panel (on page 14 ).
4. Install the server blade (" Installing a server blade " on page 25 ).
Remove the front panel/drive cage assembly
1. Power down the server blade (on page 12 ).
2. Remove the server blade (on page 13 ).
3. Remove the access panel (on page 14 ).
CAUTION: Always disconnect the drive cables from the SAS controller before removing the
DIMM baffle. Failure to do so may result in damage to the SAS controller.
4. Disconnect the drive cables from the SAS controller and remove the DIMM baffle (" Remove the DIMM
baffle " on page 14 ).
5. Remove all hard drives (" Drive option " on page 27 ).