Remove the sas controller – HP ProLiant BL465c Gen8 Server Blade User Manual
Page 18
Advertising
Operations 18
2.
Install the front panel/drive cage assembly and reconnect the drive cables.
3.
Close the serial label pull tab.
4.
Install the DIMM baffle (on page
5.
Install the access panel (on page
6.
Install the server blade ("
" on page
Remove the SAS controller
1.
Power down the server blade (on page
2.
Remove the server blade (on page
3.
Remove the access panel (on page
4.
Disconnect the capacitor pack cabling, if connected ("
" on page
Advertising