Install the sas controller – HP ProLiant BL465c Gen8 Server Blade User Manual
Page 19
Advertising
Operations 19
CAUTION:
Always disconnect the drive cables from the SAS controller before removing the
DIMM baffle. Failure to do so may result in damage to the SAS controller.
5.
Disconnect the drive cables from the SAS controller ("
" on page
6.
Remove the DIMM baffle (on page
7.
Remove the SAS controller.
Install the SAS controller
1.
Remove the DIMM baffle (on page
2.
Install the SAS controller. To properly seat the SAS controller, press firmly in the areas indicated on the
SAS controller.
3.
Advertising