HP ProLiant BL465c Gen8 Server Blade - Manual (Page 34)

Hardware options installation 34
14. Remove the thermal interface protective cover from the heatsink.
CAUTION: To avoid damage to the system board, processor socket, and screws, do not
overtighten the heatsink screws. Use the wrench supplied with the system to reduce the possibility
of overtightening the screws.
15. Align and install the heatsink. Alternate tightening the screws until the heatsink is seated properly.
16. Install the front panel/drive cage assembly.
17. Install the DIMM baffle (on page 15 ).
18. Install the access panel (on page 14 ).
19. Install the drives (" Drive option " on page 27 ).
20. Install the server blade (" Installing a server blade " on page 25 ).
Memory options