Managing sims, Enabling or disabling sim reporting – HP StorageWorks XP Remote Web Console Software User Manual
Page 156
4.
Do either of the following:
•
In the tree, select a remote storage system.
•
In the list, select and right-click a remote storage system and then select Edit Path(s) from
the pop-up menu. The list displays information about logical paths.
5.
In the list, select the logical path(s) that you want to delete.
6.
Right-click the list and then select Delete Path from the pop-up menu.
A confirmation message appears.
7.
Select OK to close the message.
8.
In the DKC Operation window, locate the upper-right list and the Preview list and then check
the settings that you have made.
•
The right-most column of the upper-right list displays the word Delete to indicate logical
path(s) to be deleted.
•
The Preview list displays logical path(s) to be deleted.
•
To cancel deleting logical path(s), select and right-click the logical path(s) in the Preview
list and then select Cancel.
9.
Select Apply to delete logical path(s).
NOTE:
If an error occurs, the right-most column of the Preview list displays the error code.
To view detailed information about the error, right-click the error code and then select Error
Detail. An error message appears and gives you detailed information about the error.
Managing SIMs
Enabling or Disabling SIM Reporting
The Optional Operation window can be used to enable CUs to report SIMs (service information
messages) to hosts, or prevent CUs from reporting SIMs to hosts. For detailed information about
SIMs, see
“Checking Service Information Messages (SIMs)” (page 242)
To change whether CUs can report SIMs to hosts:
1.
Ensure that the Remote Web Console main window is in Modify mode.
For detailed information about how to do this, see the HP StorageWorks XP24000/XP20000
Remote Web Console User's Guide.
2.
Ensure that the Optional Operation window is displayed.
3.
Select LDKC in the tree.
The list shows you whether each CU can report SIMs (see
).
4.
Do either of the following to change the setting on whether CUs can report SIMs:
•
To change the setting for all CUs, right-click LDKC in the tree, and then select Change
SIM Report from the pop-up menu.
•
To change the setting for one or more (but not all) CUs, select and right-click one or more
CUs in the list, and then select Change SIM Report from the pop-up menu.
•
The Preview list displays the changes that you have made. Note, however, that the
changes have not been applied to the storage system.
5.
See the Preview list to verify the changes.
To cancel a change, right-click the change and then select Delete.
156
Configuring Storage Systems and Logical Paths