HP StorageWorks XP Remote Web Console Software - Manual (Page 163)

NOTE: Throughout this chapter, the primary and the secondary storage systems are sometimes
referred to as local storage systems or remote storage systems. If you are logged into the primary
storage system and are using Universal Replicator for Mainframe, the primary storage system is a
local storage system and the secondary storage system is a remote storage system. If you are
logged into the secondary storage system and are using Universal Replicator for Mainframe, the
secondary storage system is a local storage system and the primary storage system is a remote
storage system.
Registering Journal Volumes in a Journal Group
To perform remote copy operations with Universal Replicator for Mainframe, the primary site
administrator must register journal volumes in journal groups in the primary storage system. Also,
the secondary site administrator must register journal volumes in journal groups in the secondary
storage system. One journal group can contain up to 16 journal volumes.
CAUTION: Do not register the volume as a journal volume during quick formatting or the quick
formatting process will not complete. For details about quick formatting see the HP StorageWorks
XP24000/XP20000 Virtual LVI/LUN (VLL) and Volume Shredder User's Guide.
To register journal volumes, follow the procedure below. Both the primary storage system
administrator and the secondary storage system administrator must perform this operation:
1. Ensure that the Remote Web Console main window is in Modify mode.
For detailed information about how to do this, see the HP StorageWorks XP24000/XP20000
Remote Web Console User's Guide.
2. Ensure that the Journal Operation window is displayed.
3. In the tree of the Journal Operation window, do either of the following:
•
To register new volumes to a journal group in which journal groups are already registered,
select the journal group from below Registered.
CAUTION: You can register volumes only when the attribute of the journal group is
Initial or when the status of the journal group is Active, Stop, Hold, Holding, or
Hold(Failure).
•
To register volumes to a journal group in which journal groups have not been registered,
select the journal group from below Free.
NOTE: You cannot select more than one journal group.
4. Do either of the following:
•
In the tree, right-click the selected journal group and then select Edit JNL Volumes from
the pop-up menu.
•
In the upper-right list, right-click the desired journal group and then select Edit JNL Volumes
from the pop-up menu.
Registering Journal Volumes in a Journal Group 163