Releasing assigned remote command device, Releasing assigned remote – HP StorageWorks XP Remote Web Console Software User Manual
Page 183
•
Set: Applies the settings in the window to the Journal Operation window (see
).
•
Cancel: Cancels the settings and closes the dialog box.
Releasing Assigned Remote Command Device
To release a remote command device assigned to a mirror, use the following procedure (this
operation can be executed per mirror):
1.
Ensure that the Remote Web Console main window is in Modify mode. For detailed information
about how to do this, see the HP StorageWorks XP24000/XP20000 Remote Web Console
User's Guide.
2.
Ensure that the Journal Operation window is open (see
).
3.
In the tree below the Registered icon, select a master journal group or a restore journal group.
4.
From the mirrors, right-click the mirror you want to release the assigned remote command
device.
5.
Select JNL Group, Release R-Cmd. Dev in the pop up menu.
6.
Use the Preview list to check the parameters that you have made. If you want to cancel a
setting, right-click the setting and then click Delete.
7.
Click Apply to release the remote command device from the mirror. Use the list in the Journal
Operation window to determine if the remote command device has been released from the
mirror. If the remote command device is not assigned, the column of the remote command
device is blank.
If an error occurs, the error code appears in the last column of the Preview list. To view detailed
information about the error, right-click the error code and select Error Detail.
Releasing Assigned Remote Command Device 183