HP ProLiant DL170e G6 Server User Manual
Page 20
Advertising
Introduction 20
HP Moonshot 1500 Chassis
Item
Description
1
SL-APM
2
SL-APM Distribution Module
3
HP Moonshot 1500 Chassis
When entering commands that require specific port and node numbers, use the SL-APM port number, SL-APM
Distribution Module port number, and the SL server node number.
For example, to turn on the power for SL server node 3 that is connected to SL-APM Distribution Module port
4, which, in turn, is connected to SL-APM port 2, enter the following:
SET POWER ON 2 4 3
where:
2 is the SL-APM port.
4 is the SL-APM Distribution Module port.
3 is the SL server node.
Parameters must have spaces between them.
Advertising
This manual is related to the following products: