HP ProLiant DL170e G6 Server - Manual (Page 78)

CLI commands 78
• Description:
Assigns static IP address and subnet mask or can be used to configure DHCP. If setting IP address and
subnet mask, both must be specified.
Set gateway
• Command:
SET GATEWAY {NONE | <IP_ADDRESS>}
• Description:
Assigns or removes gateway IP address.
Set name
• Command:
SET NAME "<name>"
• Description:
Assigns a name to SL-APM that will appear in the log and syslog entries. Name can be up to 40
characters in length.
Set password
• Command:
SET PASSWORD
SET PASSWORD "<password>"
SET PASSWORD "<password>"|account_name
• Description:
o Configures the Administrator account password. Until a password is set, both Telnet and SSH are
disabled. The password must be between 8 and 31 characters, and can include:
— Uppercase letters
— Lowercase letters
— Underscores (_)
— Dashes (-)
— At signs (@)
— Pound signs (#)
— Carets (^)
— Ampersands (&)
— Exclamation points (!)
— Plus symbols (+)
— Equal symbols (=)
— Tilde (~)