HP ProLiant DL170e G6 Server - Manual (Page 84)

CLI commands 84
SHOW TOPOLOGY ALL
where:
<PORT#> refers to the SL-APM port.
<DMPORT#> refers to the SL-APM Distribution Module port.
• Description:
o Shows the same information as the SHOW RACK and SHOW SERVERS commands.
o SHOW TOPOLOGY ALL shows the HP Power Management Controller Utility hardware and firmware
versions as well as the license status of all servers in the enclosures.
Show asset info
• Command:
SHOW ASSETINFO
SHOW ASSETINFO <PORT#>
SHOW ASSETINFO <PORT#> <DMPORT#>
where:
<PORT#> refers to the SL-APM port.
<DMPORT#> refers to the SL-APM Distribution Module port.
• Description:
o Shows the chassis in a rack in a report format.
o Also requests and shows any asset tags from the chassis and any HP-sourced 60A PDUs that are in
the rack.
Show MAC address
• Command:
SHOW MACADDR
SHOW MACADDR <PORT#>
SHOW MACADDR <PORT#> <DMPORT#>
where:
<PORT#> refers to the SL-APM port.
<DMPORT#> refers to the SL-APM Distribution Module port.
• Description:
Shows the contents of the rack, including the MAC addresses of the individual SL server nodes, if
available.
Show time
• Command:
SHOW TIME
• Description: