Setting the time, Setting the session timeout, Setting the uid led – HP ProLiant DL170e G6 Server User Manual
Page 59: Showing information
General commands 59
SET NAME "alphabravo"
Setting the time
To set the time, enter SET TIME <month> <day> <year> <hour> <minute>
where:
•
<month> is the month.
•
<day> is the day.
•
<year> is the year.
•
<hour> is the hour, in 24-hour format. For example, enter 3:00 p.m. as 15.
•
<minute> is the minute.
SL-APM does not automatically adjust for Daylight Savings Time.
The time remains on this setting until you issue the RESET FACTORY command.
Setting the session timeout
To set the SSH and Telnet inactivity timeout, enter SET TIMEOUT {<timeout_value> | NONE}
where <timeout_value> is the timeout value measured in seconds.
For example, to set a 30-second timeout, enter:
SET TIMEOUT 30
If you specify NONE, then no timeouts are set. For example, enter:
SET TIMEOUT NONE
Setting the UID LED
To activate the UID LED, enter SET UID ON <PORT#> <DMPORT#>.
To deactivate the UID LED, enter SET UID OFF <PORT#> <DMPORT#>.
where:
•
<PORT#> is the SL-APM, PDM1, or PDM2 port numbers.
•
<DMPORT#> is the SL-APM Distribution Module port number or the HP Intelligent Modular PDU
Extension Bar outlet number.
Showing information
To show information, enter SHOW INFO. The following information appears:
•
Manufacturer
•
Product Name
•
Part Number
•
Spare Part Number