Storage devices, Table 7–4 installing a disk drive sbb (continued) – HP Array Controller HSG V8.7 Software User Manual
Page 159
Storage Devices
UltraSCSI RAID Enclosure 7–13
6.
If performing a cold swap, determine if there are expansion
enclosures. If there are no expansion enclosures, go to step 7.
If there are expansion
enclosures, turn O
FF
all the
ac input boxes for each
expansion enclosure by
pressing O on each ac power
switch (C
ALLOUT
1).
7.
On the master enclosure,
turn O
FF
all the ac input
boxes by pressing O on each
ac power switch
(C
ALLOUT
1) and then go to
step 14.
8.
Install all the disk drive SBB
devices, starting in the lower
left corner in shelf 1 (devices 1
through 6) and advancing to the
right.
9.
Starting from the left, install all the disk drive SBB devices in shelf 2
(devices 7 through 12).
10. Starting from the left, install all the disk drive SBB devices in shelf 3
(devices 13 through 18).
Table 7–4
Installing a Disk Drive SBB (Continued)
1
0
CXO5488B
2
1
17
11
CXO5811B
19 20
21 22 23 24
13 14
15 16
18
7
8
9
10
12
1
2
3
4
5
6
A
B
4A
3A
2A
1A
3B
2B
1B
4B
Shelf 4
Shelf 3
Shelf 2
Shelf 1
1
2