HP Array Controller HSG V8.7 Software - Manual (Page 179)

Assembling an UltraSCSI RAID Subsystem
UltraSCSI RAID Enclosure B–7
2. Insert the array controller
into the Controller A slot
and push it in until the
extractor latches engage
the enclosure.
3. Simultaneously push in both extractor latches to firmly seat the array
controller.
4. Align the cache module with the Cache A slot (C ALLOUT 4 in step 1)
in the enclosure.
5. Insert the cache module
into the Cache A slot and
push it in until the
extractor latches engage
the enclosure.
6. Simultaneously push in both extractor latches to firmly seat the cache
module.
Table B–1 Installing Array Controllers and Cache Modules
(Continued)
CXO5602A
CXO5602A