HP StorageWorks XP Remote Web Console Software - Manual (Page 62)

Figure 40 Sample Install/Uninstall Error Detail Pane
.
Enabling Available XP Remote Web Console Options Automatically
When the licensed capacity exceeds the mounted capacity (or used capacity) because of the reduction
of disk drives, you can automatically enable only the available XP Remote Web Console options with
permanent keys using the Available button. In the License Key panel, Enable is displayed for the
available options in the Available Install column.
Whether the options can be enabled or not using the Available button depends on the relationship
between the mounted capacity of the disk drives and the licensed capacity.
Table 12 shows the status
of the Available button.
Table 12 Condition to Enable Available Button
Availability of the Available Button
Relationship between Mounted Capacity of Disk Drives and
Licensed Capacity
Available Mounted capacity ≤ Licensed capacity
Not available Mounted capacity > Licensed capacity
To install XP Remote Web Console options automatically on the XP Remote Web Console using the
Available button:
1. Log on to the SVP to open the XP Remote Web Console main panel.
2. Change to Modify mode.
3.
Click Install ( ) on the XP Remote Web Console main panel. The License Key panel is the default
view.
NOTE:
If no XP Remote Web Console options have been installed, this panel opens automatically
when you log on to the SVP.
4. From Mode, click Available.
5. Click Install.
6. In the License Key list, the row of the options that can be enabled changes to blue bold italics
and the Status column changes to Install.
7. To apply the changes to the array, click Apply.
8. Click OK to confirm. The status of the enabled options changes to Installed.
Disabling XP Remote Web Console Options
To disable XP Remote Web Console options on the XP Remote Web Console:
Installation Requirements and Procedures 62