Detail pane, Xp remote web console main panel, status tab – HP StorageWorks XP Remote Web Console Software User Manual
Page 83
NOTE:
The arrays generate a SIM whenever service is required or an error detected. The status level displayed
on the Status tab is based on the SIM information that is reported to the host. SIM information that
is not reported to the host is not displayed on the Status tab (see
).
NOTE:
This panel is not available to storage partition administrators.
Figure 55 XP Remote Web Console Main Panel, Status Tab
.
The Status panel has the following features:
•
Ref. Code displays the SIM Reference Code.
•
Error Level displays the error levels: Good, Service, Moderate, Serious, and Acute (see
).
•
Status displays either Complete (if the SIM has been deleted from the SVP) or Not Complete (if
the error has not been deleted).
•
Date displays the date that the SIM occurred.
•
Total Rows displays the total number of rows that are listed.
Detail Pane
To access the Detail panel (see
), select a row in the Status list in the Status panel, right-click,
then select the Detail command (see
).
XP Remote Web Console User Guide
83