HP ProLiant SL165z G7 Server - Manual (Page 22)

Using LO100 22
Entering help displays all the supported commands. Entering <command> help displays the help message
specific to that command.
o
Help for verbs
Calling help for a verb returns the general syntax and usage associated with issuing that verb. Calling
help for a verb that is not present in the current directory returns an Unsupported Command message. The
following examples are all valid ways to call help for a verb.
— /./-> help show
Usage: show [<target>][<options>][<properties>]
— /./-> show -h
Usage: show [<target>][<options>][<properties>]
— /./-> show -help
Usage: show [<target>][<options>][<properties>]
— /./->
o
Help for targets
Calling help for a target returns any information about the target and its contents. You can call help
for any target that is not contained in the current directory (help map1 can be called from
system1
).
—
/./-> system1 -h
Invalid command
—
/./-> system1 -help
Invalid command
—
/./-> help system1
Host System Directory
—
/./-> help map1
Management Service Processor Directory
—
/./-> cd system1
—
/./system1/-> help map1
Management Service Processor Directory
o
Help for properties
Calling help for a property or any other option for which there is no help information returns an
Unsupported Command or Invalid command message. For example:
/./system1/-> show
/./system1
Targets
oemhp_sensors
oemhp_frus
log1
led1
console 1
Properties