Microsoft windows ems management – HP ProLiant SL165z G7 Server User Manual

Page 45

Advertising
background image

Using LO100 45

Base I/O address—3F8

Interrupt—IRQ 4

o

On DL160 G6, DL160se G6, DL170h G6, DL180 G6, SL160z G6, SL170z G6, and SL2x170z
G6 servers, and SL165z G7 servers, verify the following settings:

Remote Access Configuration

Remote Access—Enabled

EMS support(SPCR)—Enabled

Terminal Type—VT100

Flow Control—None

Redirection after BIOS POST—Always

SuperIO Configuration

Serial Port Address—3F8

Serial Port IRQ—IRQ 4

2.

In the /boot/grub/menu.lst file, append the following to the kernel startup line:

console=ttyS0 115200

Comment out the line GRAPHICAL DISPLAY LINE
# splashimage=(hd0,0)/grub/splash.xpm.gz

3.

Add an entry to allow serial console login in /etc/inittab. For example:

S0:12345:respawn:/sbin/agetty -L 115200 ttyS0 vt102

4.

In /etc/securetty enable root access to ttyS0 by adding ttyS0.

5.

In /etc/sysconfig/kudzu, set kudzu to not perform serial port probing during boot. For example:

SAFE=yes

6.

After modifying and saving the previous files, reboot the server. You can now log in to the operating
system through remote console.

After POST, in the remote console, the server prompts you with a login. Enter a valid login and use the

server as you normally would. Use the ESC+Q keys to start remote console through the telnet and the
ESC+( keys to exit the remote console in telnet.

Microsoft Windows EMS management

Windows Server® 2003 provides text-based console access. You can connect a notebook to LO100 to

perform basic management tasks on the target system. The Windows® EMS Console, if enabled, displays
the processes that are running and enables administrators to halt processes when video, device drivers, or
other operating system features have prevented normal operation and normal corrective actions.
To enable Windows® EMS management on the target system:

1.

Press the F10 key during POST to enter the BIOS Setup Utility.

2.

Navigate to the Advanced>Console Redirection menu.

3.

Choose one of these options based on your server model:

o

On ML110 G6 and DL120 G6 servers:

i.

Press the down arrow (↓) key to scroll down to the Console Redirection option, and then press
the Enter key.

Advertising