HP ProLiant SL165z G7 Server - Manual (Page 49)

Using LO100 49
6. Log in to the CLP as described in the "Logging in to LO100 (on page 27)" section.
7. At the command prompt, enter cd map1/accounts.
8. Select a user by entering cd user1 or cd user#, where # is the user you want to modify and a whole
number between 2 and 16.
9. To change the user name, enter set username=<new username>. For example:
/./map1/accounts/user2/> set username=testuser2
10. To change the user password, enter set password=<new password>, and enter the new password
when prompted. For example:
/./map1/accounts/user2/> set password=testpswd2
11. Passwords are case-sensitive and can contain up to 16 characters, including quotation marks and &.
12. To change the group name enter, set group=<new group name>. Valid group settings are
administrator, user, oemhp, and operator. For example:
/./map1/accounts/user2/> set group=user
Network settings
You can view and modify network settings for LO100 using a web browser, CLP, or the BIOS Setup
Utility. If you change the IP address, the connection to the server terminates. You must reconnect to the
server using the new IP address.
Configuring network settings using a web browser
The Network Settings screen displays IP address, subnet mask, and other TCP/IP-related settings. From the
Network Settings screen, you can enable or disable DHCP and configure a static IP address for servers
not using DHCP. You can view and modify the network settings when logged in as either OEM or
administrator (admin).