HP StorageWorks 2.32 Edge Switch - Manual (Page 205)

Configuring Zoning
205 HA-Fabric Manager User Guide
Figure 108: Replace Zone Member dialog box
5. Enter the domain ID and port or the WWN of the replacement member.
6. Click OK.
Duplicating a Zone Set
1. Choose Configure > Zoning. The Zoning dialog box displays, as shown in
Figure 101 on page 192.
2. Choose a fabric from the Fabric drop-down list. This sets the fabric to target
all zoning actions.
3. Click the Zone Library tab.
4. Right-click a zone set in the Zone Sets list and choose Duplicate to duplicate
the zone set or Deep Duplicate to duplicate the zone set and all its zones. The
copied zone set displays.
5. Enter a new name for the zone set, if desired. See “ Renaming a Zone Set ” on
page 203.
6. Click OK.
Deleting a Zone
1. Choose Configure > Zoning. The Zoning dialog box displays, as shown in
Figure 101 on page 192.
2. Choose a fabric from the Fabric drop-down list. This sets the fabric to target
all zoning actions.
3. Click the Zone Library tab.
4. Right-click a zone in the Zones list and choose Delete.