HP StorageWorks 2.32 Edge Switch - Manual (Page 252)

Configuring Remote Workstations
252 HA-Fabric Manager User Guide
Configuring Windows Systems
This section describes the procedures for installing HAFM on a remote
workstation running Windows 2000, Windows NT, or Windows XP.
Requirements
The download and installation process requires the use of a personal computer
(PC) with the following minimum system requirements:
■ Operating system (one of the following):
— Windows 2000 Professional (with service pack 3)
— Windows NT 4.0 (with service pack 6a)
— Windows XP (with service pack 1a)
■ 1 gigahertz (GHz) Pentium III processor
■ 512 megabyte (MB) random access memory (RAM) memory
■ 350 MB available disk space
■ Video card supporting 256 colors at 800 x 600 resolution
■ Ethernet network adapter
■ Java-enabled Internet browser, such as Microsoft Internet Explorer (version
4.0 or later) or Netscape Navigator (version 4.6 or later)
Newer versions of the High Availability Fabric Manager or Element Managers
installed on the HAFM appliance automatically download when the remote clients
log in to the appliance.
Installation Procedure
To install the HAFM on a remote workstation:
1. Open a World Wide Web (WWW) browser.
2. Type the address of the HAFM appliance in the Location (or Address) box
on the browser, then press Enter.
Obtain the HAFM appliance address from your network administrator
The HP StorageWorks HAFM remote client installation screen displays.
Figure 111 shows the upper portion of this page.